Abstract
Abstract. Groundwater pumping can cause severe land subsidence, yet the mechanisms have not been completely clear. A laboratory physical model test was done to investigate the mechanism for pumping-induced land subsidence. In the model test, a model well was installed and pumpage through the well was taken. During and after pumping, the soil displacement and the pore water pressure were documented. The pore water pressure within the pumped sand layer decreased immediately after pumping and recovered immediately after stopping pumping, while the pore water pressure in the neighboring silty clay layers first increased and then decreased with pumping, and first decreased and then increased after pumping was stopped and groundwater level in the sand layer recovered. The duration within which the pore water pressure in the silty clay increased when pumping was increasingly great with the distance from the pumped sand layer. The compaction of the neighboring silty clay first occurred near the interface between the silty and sand layers, and the silty clay expanded vertically within some zones. The test results indicate that the mechanism for land subsidence is complex. Due to their low permeability, aquitard units may expand in a period when groundwater is withdrawn from the neighboring aquifer units, and they may compact when groundwater is recharged into the neighboring aquifer units. This is one of the reasons for the lagging compaction of aquitard units.
Highlights
Severe land subsidence due to excessive groundwater withdrawal has occurred worldwide (Galloway and Burbey, 2011), resulting in loss of ground elevation and damage to infrastructures and buildings
Laboratory model tests were often used to do researches on the mechanisms, in which groundwater withdrawal was represented by such equivalent methods as lowering and raising the water level in sand layers (Murayama, 1969; Li et al, 2014; Lv et al, 2011; Wang et al, 2018)
In order to better investigate the mechanisms of land subsidence due to pumping, a laboratory physical model test with pumping wells was constructed in this paper to really mimic groundwater pumpage
Summary
Severe land subsidence due to excessive groundwater withdrawal has occurred worldwide (Galloway and Burbey, 2011), resulting in loss of ground elevation and damage to infrastructures and buildings. Laboratory model tests were often used to do researches on the mechanisms, in which groundwater withdrawal was represented by such equivalent methods as lowering and raising the water level in sand layers (Murayama, 1969; Li et al, 2014; Lv et al, 2011; Wang et al, 2018). These methods were different from the real pumping. In order to better investigate the mechanisms of land subsidence due to pumping, a laboratory physical model test with pumping wells was constructed in this paper to really mimic groundwater pumpage.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the International Association of Hydrological Sciences
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
