Abstract
The horizontal press performance of column is deteriorated because of its special-shaped section. Moreover, because the antiseismic performance of column is worse, special-shaped column is only used in regions where seismic intensity is lower. So the main problem is to enhance the ductility and shear capacity. This test study on mechanical performance has been carried out through 14 SRCLSSC and 2 RCLSSC. The study focuses on the impacts of test axial load ratio (nt), hooped reinforcement ratio (ρv), shear span ratio (λ) and steel ratio (ρss) on the shear strength and the antiseismic performance of SRCLSSC. It can be concluded that the shear strength of SRCLSSC is increasing with the increasing of nt and ρss, but the degree of increasing is small when nt is a certainty value, and that the shear strength of SRCLSSC is decreasing with increasing of λ; The shear resistance formula of L-shaped column is derived through tests, the calculated results are in correspondence with those of the tests. It also can be concluded that the hysteretic loops of the SRCLSSC are full and the hysteretic behaviors are improved; the displacement ductility is increasing with increasing of ρv and ρss, but decreasing with the increasing of nt; the degree of variety in high axial load ratio is larger than that in low axial load ratio. If steel bars are added, the shear strength and displacement ductility of SRCLSSC are increased in a large degree.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.