Abstract
This paper takes the saucer tray as the research object, carries on the unidirectional compression test to it in the room, through the monitoring of the deformation characteristics of the saucer tray, analyzes the deformation characteristics of the saucer tray. According to its deformation characteristics, the saucer tray is divided into deformation areas. A static strain gauge was used to monitor the strain at the measuring point on the surface of the tray and the stress distribution on the exposed surface of the tray was studied. It is intended to infer the force of the disk-shaped tray through its deformation degree, which provides a certain theoretical basis and practical guiding significance for the research of disk-shaped tray.
Highlights
With the continuous improvement of the requirements for roadway formation, bolt support technology has been gradually developed
Once the tray is deformed and fails, the whole bolting system will lose its original supporting effect.Many experts and scholars to mine the dish tray stress deformation characteristics are analyzed: hong-pu kang, jian-xing wu introduces the method of making the anchor rod load tray, the tray of anchor bolt in the laboratory of the stress distribution was analyzed, and tested the disc plate deformation under different
According to the deformation characteristics of saucer tray, the main deformation areas of saucer tray are divided; A static strain gauge was used to monitor the measured strain on the surface of the tray, the stress distribution characteristics on the exposed surface of the tray were studied, and the deformation law of the tray was analyzed
Summary
With the continuous improvement of the requirements for roadway formation, bolt support technology has been gradually developed. As the main roadway support technology, it has been widely used in coal mines at home and abroad. There are few researches on the mechanical properties of bolt supporting members at home and abroad. The bearing capacity of the tray is a conventional item in the testing of the bolt's mechanical properties. Its bearing capacity and deformation and failure characteristics are related to the stability of the bolt support system, and are generally higher than the tensile strength of the bolt. Support condition, the relationship between stress and load;Meng Fanjin and Zhang Jinglong discussed the way to increase the bearing capacity of the tray under the same conditions.Liu Shuangyue and Zhang Xuntao proposed the criterion of tray instability and studied the influence of various parameters on the tray strength. According to the deformation characteristics of saucer tray, the main deformation areas of saucer tray are divided; A static strain gauge was used to monitor the measured strain on the surface of the tray, the stress distribution characteristics on the exposed surface of the tray were studied, and the deformation law of the tray was analyzed
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
