Experimental Study on Mechanical Properties of Repair Materials for Underwater Rapid Construction

Abstract

Several strength grades of sulphoaluminate cement concrete were designed, and the mechanical properties with different mix ratios were studied. This paper mainly analyzes the mechanical properties of sulphoaluminate cement concrete with the setting time test, compressive strength test and flexural test. The test results show that the setting time of cement concrete can be controlled by mixing different admixtures. One hand, the initial setting time increases from 34 min to 340 min, and the final setting time increases from 57 min to 580 min when the incorporated borax content changes from 0 to 1.0 %. Other hand, the initial setting time decreased from 34 min to 11 min, and the final setting time increased from 57 min to 18 min, when the incorporated borax content changed from 0 to 0.5 %. Furthermore, the compressive strength can reach 40 MPa, and the flexural strength can reach more than 2.5MPa after 6 hours of curing. The experiment results illustrate that the setting time and the mechanical properties satisfy the needs of the rapid construction requirements under normal temperature conditions.