Experimental study on macroscopic spray characteristics after impingement in a slit-type GDI injector

Abstract

In this paper, an experimental study on the wall-impinging spray of the slit-type GDI injector is presented. To examine the effects of various factors on the development of a spray impinging on the wall, experiments were conducted at various injection pressures, ambient pressures, wall distances from the injector tip, wall temperatures, and wall inclination angles. Behavior of the impinging spray was visualized using a planar laser scattering method. It is shown that the spray path penetration of the wall-impinging spray increases with increases in injection pressure, wall distance, wall temperature, or wall angle. On the other hand, the spray path penetration of the wall-impinging spray decreases with increases in ambient pressure. The predicted spray path penetration calculated by the empirical equation estimates the spray path penetration in all cases, and the empirical equation is optimized for the total injection pressure.