Abstract
This study deals with the impact of the operating conditions, e.g. pressure, preheating temperature, pressure drop across the nozzle, nozzle size and stoichiometry, on the reaction zone location and spray evaporation progress in case of a lifted flame. Lifted flames are highly valued for their NOx reduction potential and for their low susceptibility to flash-back and thermo-acoustic instabilities. These advantageous features arise from the improved homogeneity of the fuel-air mixture provided to the reaction zone. One distinctive feature of the lifted flames is the presence of the so called lift-off zone located between nozzle outlet and main reaction zone. Within the lift-off zone fuel and oxidizer remain a certain time in contact and mix together prior to the onset of the combustion reaction. This leads to a more uniform heat release distribution and lowers the nitrogen oxides emissions at lean conditions by reducing the temperature spikes. In contrast to many other studies the subject of investigation was not a plain jet flame, but a modified version of the airblast nozzle, widely used in industrial applications. The nozzle was operated with liquid kerosene. As liquid fuels are easier to handle than gaseous or solid, it is expected that many efforts in the future will focus on the development of liquid fuels surrogates. Our previous investigations have shown, that the nozzle is well suited to be operated with gaseous fuels as well (Fokaides et al, J Eng Gas Turbine Power 130, 011508 2008). The position of the reaction zone was determined by means of chemiluminescence of the OH∗ radicals and from its location the lift-off height was derived. In addition the fuel evaporation progress was measured by means of light scattering, revealing that fuel droplets and main reaction zone are well separated. It was found that the operating conditions have a versatile impact on the length of the lift-off zone and spray cone and thus on the degree of pre-evaporation and premixing. Thus, it may be concluded, that through a proper choice of operating conditions and combustor size a desired lift-off height can be adjusted in accordance with criteria, like available space, required emission levels etc.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.