Abstract
ABSTRACTThe impact of radiant heat flux on ignition and combustion behavior of typical oils (diesel, lubricating oil, and aviation kerosene) was conducted in a cone calorimeter. A circular steel pan with a diameter of 10 cm was used to contain diesel, lubricating oil, and aviation kerosene without water sublayer. Using the standard oxygen consumption method, we obtained ignition time, heat release rate, mass loss rate, extinction coefficient, CO, and CO2 yield, and average specific extinction area was calculated from the extinction coefficient. Janssens' method was adopted in this study to deal with ignition time and radiant heat flux under a 0.55 power rule. Results show that the fitting through Janssens' method is good for ignition time of diesel, lubricating oil, and aviation kerosene and radiant heat flux. Moreover, heat release rate, mass loss rate, and CO/CO2 ratio appear to positively correlate with radiant heat flux, whereas average specific extinction area varies in a certain range. Copyright © 2013 John Wiley & Sons, Ltd.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
