Abstract

In order to investigate the strengthen effect of different embedment lengths of the NSM strip on different damage levels. A series of tests were conducted on damaged reinforced concrete (RC) beams in flexure strengthened with near surface mounted (NSM) carbon- fiber-reinforced polymer (CFRP) strips, and initial cracking load, ultimate capacity, loading-deflection curves, and failure modes are examined and analyzed in the paper. The results showed that not only the initial cracking loads and ultimate capacities of the beams are significantly increased,but also the flexural stiffness of the beams in the yield and ultimate behavior stages are improved by using NSM-CFRP strips. The strengthen effect on lower damage level RC beams has no obvious difference with that on non-damaged RC beams. Anchoring of the strip end can increase the ultimate load capacities and decrease the ductility of RC beams. Debonding was found to be the primary failure mode in all cases.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.