Experimental Study on Factors Influencing the Efficiency of Hot Water Injection in Offshore Heavy Oil Reservoirs

Abstract

Abstract In response to the problem of low final recovery rate in conventional water flooding development of offshore heavy oil, the Bohai LD5 heavy oil field was taken as the target area. Through one-dimensional oil displacement efficiency experiments, the influence of crucial injection and production parameters on oil displacement efficiency, such as temperature, injection rate, injection production ratio, timing of hot water flooding, and injection medium, was studied. The key injection and production parameters were optimized, and the main controlling factors affecting the efficiency of hot water flooding after water flooding were identified through data analysis. Propose an optimization approach for thermal injection media and quantitatively evaluate the oil recovery efficiency under different injection and production parameters. Research has shown that for the Bohai LD5 heavy oil field, the optimal combination of injection and production parameters is: an injection rate of 2mL/min, injection temperature of 110°C, and timing of conversion to flooding at a recovery rate of 20% to 30% (water content of 55% to 70%). The hot water composite flue gas has the best oil recovery effect, considering both oil recovery efficiency and on-site construction conditions. The degree of influence of various factors on the efficiency of hot water flooding is as follows: temperature>timing of hot water flooding (recovery degree)>injection rate. Under low temperature (within 110 °C) conditions, temperature is the main factor affecting the efficiency of hot water flooding. The overall recovery rate of different injection media shows a trend of hot water composite>hot water>cold recovery.