Abstract
To explore the dynamic response and damage evolution of coal under multiple high-pressure air blasting (HPAB), simulated coal specimens were used in the HPAB experiments, and the variation laws of stress field, vibration field, damage field, and cumulative fracture failure process in specimens were analyzed from a macro point of view. A scanning electron microscope (SEM) and mercury intrusion porosimetry (MIP) were used to observe the pore distribution near the blasthole of the specimen and analyze the variation law of pore structure parameters under multiple HPAB from the microscopic point of view. The test results show that (1) the stress wave generated by HPAB has a great impact on the near zone. After multiple HPAB, the damage value at the place 50 mm away from the blasthole increases by 3.91 times compared with the one shock from HPAB, and the strain peak and vibration velocity are reduced by 17.86% and 63.05%, respectively. With the increase of distance, the internal damages of the specimens in the middle and far zones are mainly driven by the stress wave and the high-pressure air, and the strain peak, vibration velocity, and damage degree gradually decrease. (2) With the increase of shock times in HPAB tests, the stress wave attenuation index decreases at first and then increases, and the damages degree of the middle and far zones increase slowly in the first few shocks and then increase rapidly. The site coefficient ( k ) shows an overall decreasing trend, whereas the attenuation coefficient ( α ) tends to increase. (3) The multiple HPABs have a great impact on the pore structure of the specimens. Compared with unshocked specimen, the cumulative mercury injection and pore volume increased by 152.04% and 135.05%, respectively. The number of connecting pores with large pore diameter is significantly increased. The multiple HPAB can effectively improve the pore and fracture structure in the specimens and form a relatively developed fracture network channel. The study results have certain guiding value for solving practical engineering problems of low extraction efficiency in low permeability coal seams.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.