Experimental Study on Dynamic Mechanical Properties of Amphibolites, Sericite-quartz Schist and Sandstone under Impact Loadings

Abstract

Abstract In order to investigate rock dynamic mechanical properties of amphibolites, sericite-quartz schist and sandstone under the different strain rates varying from 30 s -1 to 150 s -1 , the specimens were subjected to axial impact at different projectile speeds by using the split Hopkinson pressure bar (SHPB) of 100 mm in diameter. The optimal experimental size of rock samples is verified by analyzing the stress equilibrium of cylindrical rock samples in different thicknesses. It has studied the mechanic properties of these three rocks which under impact loadings; and analysed the dynamic compressive strength, failure modes, energy dissipation variation with the strain-rate and the strain-rate hardening effect from the perspective of material microstructure. Experimental results show that the dynamic Young's modulus of rock samples increase with strain-rate slightly. The dynamic failure modes of different rock samples are always different. When at a lower strain-rate, the damage of sandstone takes a peeling off the external radial tensile failure mode, but that of amphibolites takes axial splitting mode; when at a higher strain-rate, sandstone takes granular crushing failure mode, and that of amphibolites and of sericite-quartz schist take massive crushing mode. Significant strain-rate effect can be represented by a linear relation between the specific energy absorption and the strain-rate , or between the dynamic strength increase factor η and .