Abstract

Based on undrained cyclic simple shear tests conducted on coastal tidal soft soil under various conditions of cyclic stress ratios and moisture contents, this study investigated the influence of these factors on the dynamic properties of the soil. The findings indicated that with increasing moisture content and stress cycle ratio, the stress–strain hysteresis loop gradually expanded, resulting in a higher strain difference and a transition from a dense to a sparse curve pattern. Moreover, the symmetry of the hysteresis loop was lost in the later stages of shearing. With an increase in the number of cycles, the cumulative shear strain gradually increased, and the increase in the cyclic ratio of water content to stress reduced the number of cyclic shear cycles required to achieve failure, thereby accelerating the soil’s failure rate. A predictive formula was developed based on the experimental results to estimate the failure cycles as a function of the cyclic stress ratio and moisture content. Furthermore, the softening index decreased gradually with an increasing number of cycles, and a higher moisture content and cyclic stress ratio accelerated the soil’s softening process. It was observed that under the conditions of optimal moisture content, the soil exhibited a slower softening rate during the initial stage of shearing.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.