Abstract

A deep-air-staging combustion technology was previously developed to achieve reduction in NOx emissions and to eliminate strongly asymmetric combustion found in down-fired boilers. Recently, one of two down-fired 600MWe supercritical utility boilers using this technology (without applying overfire air) began commercial operations. To understand coal combustion and NOx emissions characteristics within the furnace, full-load industrial-size experiments were performed at different air-staging conditions with measurements taken of gas temperatures in the burner region, gas temperatures and species concentrations in the near wing-wall region, carbon content in fly ash, and NOx emissions. As expected, the furnace performance characterized by relatively timely coal ignition, symmetric combustion, and low levels of carbon in fly ash, developed in the furnace at all three settings. Deepening the air-staging conditions could reduce NOx emissions by one-fifth, but varied slightly carbon in fly ash. In view of the still high NOx production (i.e., 1036mg/m3 at 6% O2), adding an overfire air system which was essentially a part of the technology, was recommended for the boiler to significantly reduce the present NOx emissions.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.