Abstract
Summary The pore network controlled by in-situ stress significantly influences the CO2 flooding in low-permeability reservoirs. In this study, the CO2/oil distribution and response of pore structure were monitored online using low-field nuclear magnetic resonance (LF-NMR), and the in-situ stress dependence of oil recovery was analyzed. The results show that the pore structure consists of adsorption pore (AP < 1 millisecond), percolation pore (1 millisecond < PP < 10 milliseconds), and migration pore (10 milliseconds < MP). Oil recovery was primarily influenced by AP and MP at lower in-situ stress, while PP and MP are the main contributors at higher in-situ stress. The matrix experienced compression deformation, microfracture generation, and shrinkage of pore, combined with an increase and followed by a decrease in oil recovery, responding to the increase of in-situ stress from 5 MPa to 15 MPa and from 15 MPa to 20 MPa. The reduction in gas channels promotes a piston-like advancement of oil displacement, resulting in an initial increase in oil recovery, while subsequent decline is linked to heightened pore heterogeneity caused by high in-situ stress. Increased heterogeneity reduces gas displacement stability, hampers CO2 sweep efficiency, and results in a granular distribution of residual oil. The findings provide insight on CO2-enhanced oil recovery (EOR) in low-permeability reservoirs.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
