Abstract
Abstract The process parameters of bending forming for magnesium alloy panel are determined, and magnesium alloy panel bending tools are developed. The experimental research is completed, and several specifications of magnesium alloy panels are processed successfully, without cracks, rib buckling, or rib shoulder collapse defects. During the bending process of the magnesium alloy panel, the press height and rib height ratio have a significant effect on the microstructure of the panel. With the increase of press height and rib height ratio, the grain size decreases. The microstructure and properties of the magnesium alloy panel are improved and grains are refined. When the rib height ratio is 7/2 and press height is 7 mm, the minimum grain size at the rib of the panel is 15.6 µm and the minimum grain size at the skin surface is 17.2 µm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.