Abstract
The vacuum preloading method has been wisely chosen among many ground-improvement methods considering the time limit of many projects and the characteristics of reclaimed soil. However, the loss in vacuum with soil depth, the clogging around prefabricated vertical drains (PVDs), and the deteriorative consolidation of the deep soil layer, among other factors, create a large challenge to vacuum preloading for dredged marine clay fill. Thus, this study proposes a two-stage vacuum preloading method and focuses on its feasibility and effectiveness. Contrasting laboratory tests are performed in two identical experimental tanks with dredged marine clay fill from the Wenzhou land reclamation site in China. In one tank, the one-stage vacuum preloading method is used to serve as a baseline for this study. In the other tank, use of the two-stage vacuum preloading method is proposed for consolidation; it comprises two stages. In the first stage, the dredged marine clay fill is conditioned by vacuum preloading using half of the PVDs, where the dissipation of the excess pore water pressure tends to be steady. In the second stage, vacuum preloading is activated using all the PVDs. The results show that a better consolidation effect is achieved with the proposed method in terms of the settlement, vacuum pressure, pore water pressure, water content, vane shear strength, and soil particle microstructure after soil consolidation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.