Abstract

ABSTRACT Wooden culture heritage has caused serious results due to the ravages of frequent fire disasters. The fire propagation over the weathered wood was reported to be fast, especially wood separated by air gaps. Presently, experiments were performed to study weathering effects on the flame spread performance over discrete wood chips separated by air gaps. A series of six 2 cm-long 10 cm-wide wood chips were uniformly installed on a vertical sample holder. The thickness of wood chips differed from 1 mm to 7 mm, the air gaps between the two samples varied from 1 cm to 2 cm. The flame spreads across or along with the woodgrain orientation. It indicates that the accelerated weathering process impacted a clear influence on flame spread over discrete wood chips. Regarding the flame spread across woodgrain orientation, both burning duration and MLR were reduced. In contrast, the burning duration was greatly enlarged but MLR was decreased when flame spread along with the woodgrain orientation. In general, the thickness differing from 3 mm to 7 mm was found to be linear with averaged flame spread rate. It suggests that the flame length of the samples with a horizontal grain orientation (flame across woodgrain) and vertical grain orientation (flame along with woodgrain) are increased and shorten greatly due to accelerated weathering, respectively.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.