Experimental study of true triaxial high pressure subcritical water impact fracturing

Abstract

A new fluid alternative to slick water for fracturing shale gas can reduce the waste of water resources and improve the extraction efficiency, enabling volumetric fracturing. For the new fracturing technique, the experiments of different release pressures under pre-injection and for pre-injection were conducted using a self-designed true triaxial experimental system, and the pressure pulse curves were plotted to analyze the fracturing principle. The experimental results showed that: (1) the pressure rise curve in the reactor can be divided into five stages: initial reaction, linear pressure rise, rate slowdown, instantaneous pressure release, and residual pressure stages; (2) Pre-filling fracturing requires a smaller expansion ratio, weaker pressure degradation, resulting in better fracturing effect; (3) The increase in the initial fracture length leads to an increase in the pressure required to extend the fracture, and high-pressure subcritical water impact fracturing achieved fracture extension at a lower fluid pressure; (4) The fractal dimension has a strong linear relationship with fracture complexity, which is a new option when evaluating the fracturing effect. Volumetric fracturing allows for the creation of more tiny trenches that increase reservoir permeability, leading to better recovery of the reservoir’s energy resources.