Abstract
Abstract Energy consumption by human enhanced activities has led to distinctive environmental problems; in particular, climate change and global warming. In hot regions, the main reason for energy consumption comes from the cooling of many buildings. The intensity and duration of the sunshine in hot regions have a direct relation with the usage of cooling systems. The aim of this paper is to study the performance of eucalyptus fibre pads which can be used as a new material for the evaporative cooling process in order to reduce the energy consumption caused by cooling loads. A wind tunnel is used to investigate the performance of evaporative cooling by eucalyptus fibres. This paper also analyses the behaviour of the eucalyptus fibres under different conditions. From the measurement of one material sample, it was found that the maximum reduction of air temperature was between 11.3 °C and 6.6 °C, while the maximum cooling efficiency was in the range of 71% and 49% at 0.1 and 0.6 m/s air velocities respectively. Corresponding cooling capacities were also calculated as 108 W and 409 W indicating a directly proportional relation between air velocity and cooling performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.