Abstract

The paper presents the problem of the effect of air filter pressure drop on the operating parameters of a modern internal combustion engine with compression ignition. A literature analysis of the results of investigations of the effect of air filter pressure drop on the filling, power and fuel consumption of carburetor and diesel engines with classical injection system was carried out. It was shown that each increase in the air filter pressure drop Δpf by 1 kPa results in an average decrease in engine power by SI 1–1.5% and an increase in specific fuel consumption by about 0.7. For compression ignition engines, the values are 0.4–0.6% decrease in power and 0.3–0.5% increase in specific fuel consumption. The values of the permissible resistance of the air filter flow Δpfdop determined from the condition of 3% decrease in engine power are given, which are at the level of 2.5–4.0 kPa—passenger car engines, 4–7 kPa—truck engines and 9–12 kPa—special purpose vehicles. Possibilities of decreasing the pressure drop of the inlet system, which result in the increase of the engine filling and power, were analyzed. The program and conditions of dynamometer engine tests were worked out in respect to the influence of the air filter pressure drop on the operation parameters of the six-cylinder engine of the swept volume Vss = 15.8 dm3 and power rating of 226 kW. Three technical states of the air filter were modeled by increasing the pressure drop of the filter element. For each technical state of the air filter, measurements and calculations of engine operating parameters, including power, hourly and specific fuel consumption, boost pressure and temperature, were carried out in the speed range n = 1000–2100 rpm. It was shown that the increase in air filter pressure drop causes a decrease in power (9.31%), hourly fuel consumption (7.87%), exhaust temperature (5.1%) and boost pressure (3.11%). At the same time, there is an increase in specific fuel consumption (2.52%) and the smoke of exhaust gases, which does not exceed the permissible values resulting from the technical conditions for admission of vehicles to traffic.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call