Abstract
Expansive soils are distributed across a wide area in China, and land transport and surface construction will inevitably involve these soils. To mitigate the deficiencies of single-method expansive soil modification, it is highly important to adopt the use of polyvinyl alcohol (PVA) to improve expansive soils and enhance the strength and toughness of modified soils. In addition, solidification technology can be utilized for the resource utilization of expansive soils. In this study, triaxial testing is employed to evaluate the mechanical properties of solidified soil. When the confining pressure is the same and with increasing PVA content, soil particles and PVA combine to form a cemented substance, which fills the internal pores of the soil samples, enhances the cohesion between soil particles, and improves the bearing capacity of the soil. The stress–strain curve for the modified soil first increases and then decreases. The shear strength peaks at a PVA content of 3%. Based on the improved soil with a 3% PVA content, GDS dynamic triaxial tests were carried out to investigate the effects of different confining pressures and frequencies on the dynamic stress–strain curves, dynamic modulus of elasticity, and variation rule for the damping ratio of the improved soil. The results show that the dynamic stress–strain curve for the improved soil increases with increasing confining pressure and frequency and that the dynamic stress–strain backbone curves exhibit significant nonlinearities at different frequencies and circumferential pressures. The dynamic elastic modulus increases with increasing confining pressure and frequency and decreases gradually with increasing dynamic strain. The initial dynamic modulus of elasticity increases with increasing envelope pressure and frequency but is less affected by frequency, and the damping ratio decreases with increasing confining pressure and frequency. Soil treatment can improve the pore distribution, inhibit the extension of soil cracks, and enhance soil compactness.
Published Version (Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.