Abstract
Vortex shedding from cylinders has been extensively studied due to its occurrence in many engineering fields. Many experimental studies reported in the literature focus on the aerodynamics of the vortex shedding process but the literature about the radiated noise is more scarce. The aim of the work presented here is to extend the available noise data. Aero-acoustic wind tunnel tests were carried out using cylinders with different cross-sections: circular, square, rectangular and elliptical. Flow speeds between 20 and 50m/s were used, corresponding to Reynolds numbers in the range from 1.6×104 to 1.2×105. The dependence of the noise on the yaw angle, flow speed, cross-sectional shape, angle of attack and radiation angle (directivity) is assessed. The results obtained are compared, where possible, with those found in the literature for similar cases. It is intended that the results can be used for the validation and calibration of numerical and empirical aerodynamic noise prediction models.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.