Abstract
This paper reports the changes in surface properties of Ti-6Al-4V titanium alloy through material transfer mechanism using manganese powder mixed electric discharge machining (PMEDM) process. Surface properties were measured in terms of micro-hardness and surface roughness. Two machine input parameters namely peak current (Ip) and pulse-on-time (Ton) were varied at three levels during the experimentation. Experimental results show improvement in micro-hardness by 72.70%, with better surface finish. Qualitative analysis of selected samples was performed using scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectrograph (EDS) analyser. Significant transfers of different elements from electrode as well as manganese powder mixed dielectric were observed either in free form or compound form on machined surface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have