Experimental study of steam condensation heat transfer characteristics in a horizontal tube under rolling motion

Abstract

As an efficient heat transfer method, in-tube condensation heat transfer is widely used in various fields, including passive residual heat removal systems (PRHRS) of floating power plants under ocean conditions. The experimental investigation aimed to study the condensation heat transfer characteristics of steam in a 25 mm inner diameter horizontal tube with a heat transfer length of 1050 mm under rolling motion. The study used a mass flux of 30 kg/(m2·s) and investigated average vapor qualities, rolling amplitude, and rolling period ranging from 0.32 to 0.79, 0 °–20°, and 10 s–20 s, respectively. The experimental results show that the condensation flow patterns under rolling conditions are more complex than those under non-rolling motion due to the influence of the rolling period and rolling amplitude. The instantaneous heat transfer coefficient (IHTC) changes periodically due to the rolling motion and has the same change period. The pulsation amplitude of the IHTC increases with increasing rolling amplitude but weakens as the vapor quality increases. The effect of the rolling period on the IHTC is much less than that of the rolling amplitude. At low vapor quality, the time-averaged heat transfer coefficient (THTC) under the rolling motion condition increases with the rolling amplitude and period, and the maximum enhancement of THTC is 44%. As the vapor quality increases, the THTC under rolling conditions is the same as that under non-rolling conditions. These findings provide important insights into the condensation heat transfer characteristics of vapor in a horizontal tube under rolling motion, which can help improve the design and operation of in-tube condensation heat transfer systems in various fields.