Experimental study of smoke effects on energized electrical cabinets located nearby a lubricant oil pool fire

Abstract

SummaryThis paper presents an experimental study of smoke exposure effects on potential malfunction of three electrical cabinets located nearby an oil pool fire. This study was performed as part of the PRISME‐2 international OECD project. Lubricant oil was used as fire source, and three real energized electrical cabinets were used as targets exposed to smoke in the adjacent room to the fire room. The main fire properties, as well as the fire consequences, such as gas temperatures and smoke concentrations in the rooms, and the cabinets are presented in detail. The heat release rate was thus assessed at around 500 kW for nearly all the fire duration, and maximum gas temperatures reached 300°C in the fire room, and 120°C in the adjacent room. Moreover, the maximum gas temperatures and soot mass concentrations inside the cabinets ranged from 90 to 120°C and from 0.3 to 1 g/m3, respectively. Nevertheless, continuous electrical monitoring of the three cabinets did not highlight malfunction. After the experiment, monitoring test of the cabinets was conducted to investigate the potential effects. The isolation resistance of electrical circuits on the most severe smoke exposed cabinet reduced during the monitoring test. It seemed the soot deposition have caused it.