Abstract
A series of small scale tests was conducted to investigate the influence of sidewall on flame characteristics of heptane pool fires in a channel, considering pool shape (aspect ratio: 1, 2, 4 and 8) and pool orientation relative to sidewall. Distance between fire and sidewall was changed systematically. Both transverse flame development (along the direction of channel width) and longitudinal flame development (along the direction of channel length) were recorded by digital video. Results show that for a fixed fire location, the heat release rate increases with the increasing pool aspect ratio (namely a larger pool perimeter), which indicates more air entrainment and more intense combustion. In wall fire cases, when the long pool rim is perpendicular with channel sidewall, the flame can obtain more air entrainment with a weaker boundary restriction from the sidewall, compared to the case with the long pool rim being parallel with sidewall. Comparison of some previously established correlations based on various experimental conditions with our test results is made. Due to the fact without considering sidewall effect and fuel shape on the air entrainment of fire plume, the classic correlations need to be further improved. Therefore, an integral flame length model considering both sidewall effect and fuel shape is developed, which correlates well with all the data from cases with various pool positions, orientations and aspect ratios.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.