Abstract

Microbial fuel cells (MFCs) are a kind of bioreactor for generating electricity, facilitated by exoelectrogens while treating wastewater. The present article focuses on the performance of an air cathode plexiglass MFC in terms of chemical oxygen demand (COD) removal efficiency and power output by performing two sets of experiments. The proton exchange membrane and electrode materials were Nafion 117 and carbon felts, whereas, for stable biofilm formation on the anode surface, a pure culture of Shewanella baltica 20 was used. Firstly, sterile Luria-Bertani (LB) media containing lactate, ranging from 20 to 100 mM, was continuously fed to an MFC, and a maximum power density of 55 mW/m2 was observed. Similarly, artificial wastewater with COD ranging from 3250 mg/L to 10,272 mg/L was supplied to the MFC in the second set of experiments. In this case, the maximum power density and COD removal efficiency were 12 mW/m2 and 57%, respectively. In both cases, the hydraulic retention time (HRT) was 1.5 h. It was found that electricity generation depends on the characteristics of the wastewater. These initial findings confirm that the design aspects of an MFC, i.e., surface area to volume ratio, and external resistance with respect to the quality of influent need to be optimised to improve the MFC’s performance.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call