Experimental Study of Mechanical Behaviour of an RC Concrete Prepared Using M-Sand along with Chemical Admixtures

Abstract

Abstract: Concrete plays a predominant role in the construction industry and a large quantum of sand is being utilized for various construction of structure. River sand has become expensive due to excessive cost of transportation from natural sources. Also, large- scale depletion of these sources creates environmental problems. So as to overcome, M- Sand can be an economic alternative to the river sand with respect to its availability, cost and environmental impact M-sand a by-product from the stone crushing unit which is released directly into environment can cause environmental pollution. And can be defined as residue, tailing or other non-voluble waste material after the extraction and processing of rocks to form fine particles. Recycling is the key component of modern waste management system and it reduce the consumption of fresh raw materials, reduce energy usage, reducing the need for conventional waste disposal and to lower greenhouse gas emission. To investigate the mechanical properties as compressive strength “Cubes” of size 150 mm x 150 mm x 150 mm are prepared, the Split tensile strength “cylinder” of size 750mm x 150 mm x 150 mm and also load deflection of beam and column are prepared and investigation should be carried out at a regular interval of 7,14 and 28 days. And also, the dynamic behavior is also studied. This present work is an attempt to use M-sand as a replacement (25%, 50%, 75% & 100%) for River Sand in M-30 Grade concrete mix.