Abstract
Advanced manufacturing techniques, such as plasma, waterjet, and laser can facilitate field assembly and disassembly of steel structural components, and therefore potentially transform how steel structures are designed and constructed. These techniques have opened up an opportunity to create a new class of steel connections that rely on intermeshed (i.e. interlocked) components in lieu of traditional connectors such as weld and bolt. This paper presents an experimental investigation on the mechanics of such intermeshed steel connections manufactured by high-definition plasma and waterjet cutting. Four full-scale specimens with an intermeshed connection were designed to resist gravity loading in steel frames. The experimental testing program focused on the behavior of intermeshed connections under vertical loads including pure flexural and combined flexural-shear loading. Both global load-deflection response and local deformation were measured to provide insights into the complex load transfer mechanisms. The experiments demonstrated ample load carrying capacity, approaching the beam plastic moment, and ample ductility, approaching a deflection over span length ratio of 1/60 to 1/40, through the interaction of individual components. Analysis of the test data also raises important questions that must be addressed for the practical design of these connections.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
