Abstract
Five types of coaxial injectors were investigated experimentally using hot hydrogen-rich gas and oxygen-rich gas, which were respectively provided by a GH2/GO2 hydrogen-rich perburner and a GH2/GO2 oxygen-rich preburner. The injectors were the shear coaxial injector, the oxidizer post expansion coaxial injector, the fuel impinging coaxial injector, the central body coaxial injector, and the shear tri-coaxial injector. The characteristic velocity efficiency and the combustor’s wall temperatures were obtained for different design parameters through the experiments. It can be concluded that angles of the oxidizer post expansion and the fuel impinging have little influence on the combustion performance and the wall temperatures. The contact area between fuel and oxidizer and the mass flow rate have significant impacts on the combustion performance. The shear tri-coaxial injector has the best combustion performance but also the highest wall temperatures among the five types of injectors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
