Abstract
A new idea is investigated in this study to reduce the cover spalling of high-strength concrete columns: installing relatively cheap materials such as household fly screen and wire mesh in the formwork of RC columns. Three materials were chosen in this study: fiberglass fly mesh (FGFM), standard aluminum fly mesh (SAFM), and 12.7×12.7 galvanized steel wire mesh (S12.7 WM). A total of 16 cylindrical specimens with a length of 925 mm and a diameter of 205 mm were cast and tested under concentric, eccentric, and pure bending loading. The testing results showed that S12.7 WM significantly improved the load-carrying capacity under both concentric and eccentric loading but did not significantly increase the ductility of the columns for each load case. FGFM and SAFM significantly improved the ductility of columns under concentric loading, but the significance decreased with the increase in eccentricity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.