Abstract

An experimental study of the effect of longitudinal vortices generated by weak shock waves on the laminar-turbulent transition in the boundary layer of a flat plate at a Mach number 2 is conducted. To amplify the effect of the longitudinal vortices generation, a model with leading edge blunting radius of 0,5 mm was used. The disturbance intensity was measured with a constant temperature hotwire anemometer and a single-wire sensor. To change the Reynolds numbers in the flow, the method of varying the pressure in the pretest section of a supersonic wind tunnel was used. According to the experimental conditions, the level of mass flow perturbations in the test section T325 of ITAM SB RAS did not exceed 0,1 % of the mean flow in the frequency range from 0,2 to 50 kHz. In this work, it is obtained for the first time that stationary streamwise vortices that arise in the boundary layer of a flat plate because of the action of a pair of weak shock waves on its leading edge lead to an early laminar-turbulent transition at different Reynolds numbers. In the case of a homogeneous boundary layer, the transition is achieved at Rex≈ 3,1 × 106, and in measurements in the region of vortices from shock waves at Rex≈ 1,5 × 106and Rex≈ 2 × 106.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.