Abstract

Dual-fuel diesel/natural gas direct-injection engine is promising and highly attractive due to its low-carbon emission and high thermal efficiency, and both high-pressure diesel and natural gas injections are critical for air-fuel mixing. This study presents an optical experimental investigation on the high-pressure dual-fuel diesel/methane injection process based on a constant-volume vessel test rig. The results show that the diesel penetration process of the dual-fuel injection experiences two stages: Stage I, the diesel tip penetration S diesel, the diesel spray area A diesel, and the diesel spray perimeter C diesel of the dual-fuel injection are smaller than those of the single diesel injection. Stage II, both the diesel and methane continue to penetrate forward, and S diesel, A diesel, and C diesel of the dual-fuel injection become larger than those of the single diesel injection do. The diesel injection pressure causes effect on the dual-fuel spray penetration. The diesel injection pressure directly causes linear influence on the two-stage dual-fuel injection characteristic. As the diesel injection pressure increases, the diesel spray meets the methane jet advancer and the cross point occurs linearly earlier. Furthermore, the dual-fuel injection is asymmetric and the methane gas jet enhances this asymmetry so that the spray cone shifts to the side of the methane gas jet.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call