Abstract
Plasma-ion implantation was used to achieve stable dropwise condensation of saturated steam on stainless steel tubes. For the investigation of the efficiency of plasma-ion implantation regarding the condensation process a condenser was constructed in order to measure the heat flux density q ˙ and the heat transfer coefficient h c for the condensation of steam on the outside surface of a single horizontal tube. For tubes implanted with a nitrogen ion dose of 10 16 cm −2, the heat transfer coefficient h c was found to be larger, by a factor of 3.2, in comparison to values theoretically calculated by the corrected Nusselt film theory. The heat flux density q ˙ and the heat transfer coefficient h c were found to increase with increasing ion dose and steam pressure. The heat transfer coefficient decreases with increasing surface subcooling as it has been found in former work for dropwise condensation on ion implanted vertical plates.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
