Experimental study of damage propagation in Over-height Compact Tension tests

Abstract

This paper describes an experimental investigation into progressive damage development in notched fibre-reinforced composites laminates. The Over-height Compact Tension (OCT) test captures the behaviour of laminates typical of large structures and permits the stable formation of a process zone ahead of the crack tip. This allows a study of the influence of sub-critical damage on progression of fibre failure. A range of lay-ups have been tested using dispersed and blocked plies in the thickness direction. The load vs. pin opening displacement (POD) curve is used to characterise the progressive failure of specimens. A number of interrupted tests were performed for each lay-up to capture the sub-critical damage process before the onset of fibre fracture. Results show that dispersed plies promote fibre failure and crack growth whilst blocked plies promote a larger amount of splitting and delamination which in turn causes a larger process zone and ultimately a tougher laminate.