Abstract
In the framework of sodium fast reactors, the management of tritium contamination in the sodium secondary circuit and the control of its release into the atmosphere is fundamental. In order to capture and recover tritium by coprecipitation worth hydrogen in cold traps, it is necessary to maintain a certain amount of hydrogen dissolved in the liquid sodium stream. Hydrogen injection by permeation through nickel membranes has been proposed to provide a continuous hydrogen intake to a liquid sodium stream, allowing the desired hydrogen concentration to be reached. A permeator prototype and the related process have been designed. Permeation tests have been carried out in an experimental facility set up at CEA Cadarache at sodium temperatures from 375°C to 450°C and hydrogen partial pressures from 5 × 103 to 3 × 104 Pa in order to quantify their influence on hydrogen permeation flux. Measurements on both the gas and sodium sides provide a complete hydrogen content observability over the system. Experimental results show a good agreement with the theoretical permeation laws for hydrogen pressures below 2 × 104 Pa and provide an estimation of the temperature dependency of the permeability coefficient, which will be useful for the industrial scale-up of the process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
