Abstract
This paper deals with the experimental results of a xenon flash-lamp pumped passively Q-switched Nd:YAG laser using Cr4+:YAG saturable absorber. The need of a laser cavity to be integrated into a time-of-flight laser range finder is of great interest as an experimental investigation of several laser resonators. Two types of laser resonator, with different lengths, have been studied: the flat-flat and plano-concave ones. Each laser cavity consisted of a flat output coupler, characterized by its reflectivity, and combined with a high reflectivity mirror, allowed the observation of the laser output characteristics. It has been demonstrated that the radius of curvature, of the high reflectivity mirror, is of great importance in determining the best laser performances. The best results were achieved using a flat-flat cavity of 18.5 cm in length, electrical pump energy of 21 J, and an output coupler reflectivity of 50%. The output laser energy was 28.4 mJ for a pulse width of 38 ns. Multiple laser pulses were also obtained, by increasing the electrical pump energy or through adjusting the laser resonator alignment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
