Abstract

There is great interest in producing hydrogen from renewable sources such as biomass rather than from fossil fuels. This paper presents new experimental results at different pyrolysis temperature and development of a dynamic model for a biomass pyrolysis/steam reforming process in a two stage fixed bed reactor. The model considers the hydrodynamics of the fixed bed reactor, the interfacial mass and energy transfer between the fluid–solid systems and the porous catalyst, and the energy transfer on a kinetic model. The 2D dynamic model resulted in a system of partial differential equations which was solved numerically in gPROMS®. The model was validated with the experimental results. The model predictions show good agreement with the experimental results. The model can be used as a useful tool for design, operation, optimisation and control of the biomass steam gasification process.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.