Experimental study and numerical simulation of the damage mode of a square reinforced concrete slab under close-in explosion

Abstract

Terrorist attacks using improvised explosive devices on reinforced concrete buildings generate a rapid release of energy in the form of shock waves. Therefore, analyzing the damage mode and damage mechanism of structures for different blast loadings is important. The current study investigates the behavior of one-way square reinforced concrete (RC) slabs subjected to a blast load through experiments and numerical simulations. The experiments are conducted using four 1000mm×1000mm×40mm slabs under close-in blast loading. The blast loads are generated by the detonations of 0.2–0.55kg trinitrotoluene explosive located at a 0.4m standoff above the slabs. Different damage levels and modes are observed. Numerical simulation studies of the concrete damage under various blast loadings are also conducted. A three-dimensional solid model, including explosive, air, and RC slab with separated concrete and reinforcing bars, is created to simulate the experiments. The sophisticated concrete and reinforcing bar material models, considering the strain rate effects and the appropriate coupling at the air–solid interface, are applied to simulate the dynamic response of RC slab. The erosion technique is adopted to simulate the damage process. Comparison of the numerical results with experimental data shows a favorable agreement. Based on the experimental and numerical results, the damage criteria are established for different levels of damage. With the increase of the explosive charge, the failure mode of RC slab is shown to gradually change from overall flexure to localized punching failure.