Abstract
The utilization of fluidized bed reactors for the biomass hydropyrolysis vapor upgrading is essential in the conversion of biomass into liquid fuels. Conducting pyrolysis experiments in fluidized bed reactors with a N2-H2 mixed atmosphere is advantageous for system operation as it allows for lower minimum operating velocities, enhances pyrolysis efficiency, and reduces heat loss. This research examines the impact of hydrogen pressure in a bubbling fluidized bed reactor using a N2-H2 mixed carrier gas, with poplar wood as the feedstock and Ni-Moγ/Al2O3 as the catalyst. Through experimental and correlation analyses, significant relationships are observed between hydrogen pressure and the production of liquid and gas-phase products, with varying effects attributed to changes in hydrogen ratio and reaction pressure. Elevated hydrogen ratios facilitate secondary reactions such as the CO2 hydrogenation, resulting in a decline in CO2 production and an elevation in the yields of light hydrocarbons and aqueous phase products. Augmenting the reaction pressure to enhance hydrogen pressure aids in promoting hydrogen saturation and cracking, and amplifying the hydrogen pressure through an increase in the reaction pressure at a specific hydrogen ratio proves more efficacious in enhancing both the quantity and quality of bio-oil produced. In the context of poplar hydropyrolysis vapor upgrading utilizing a Ni-Moγ/Al2O3 catalyst, a hydrogen ratio of 50 % at a reaction pressure of 1.5 MPa emerged as the preferred option for achieving a 12 % bio-oil yield with a moderate average bio-oil carbon number and satisfactory hydrogenation levels. This comprehensive investigation examines the influence of hydrogen pressure on biomass hydropyrolysis, highlighting variations in the impacts of changes in hydrogen ratio and reaction pressure on pyrolysis results. These results offer a theoretical framework for discerning distinctions between hydropyrolysis investigations carried out in pure hydrogen atmospheres versus mixed N2-H2 atmospheres.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
