Abstract
Purpose – This manuscript aims to deal with the tribological property variations of engine oil (SAE15W40) by the addition of copper oxide (CuO) nanoparticles on weight percentage basis. Design/methodology/approach – Experimental studies on the influence of CuO nanoparticles utilised as an additive in lubricating oil (SAE15W40) under boundary lubrication conditions have been carried out using a pin-on-disc machine in accordance with ASTM G-99 standard. The variation of viscosity, coefficient of friction, wear and settling of nanoparticles has been studied as a function of particle concentration in the lubricant. Findings – Results show that the frictional force and specific wear rate decrease with an increase in concentration of nanoparticles comes to a minimum at a specific concentration and then increases, showing the presence of an optimum concentration. With the increase in concentration of nanoparticles, the kinematic and dynamic viscosities, and the flash and fire points are found to increase. Originality/value – The use of CuO nanoparticles as additives to a moderate level is a very efficient means of improving the tribological properties of lubricating oils.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
