EXPERIMENTAL RESULTS ON THE SHEAR BEHAVIOUR OF STEEL FIBRE SELF-COMPACTING CONCRETE (SFSCC) BEAMS

Abstract

This paper presents an experimental test program that was carried out to investigate the shear performance of steel fibre self-compacting concrete (SFSCC) beams. In this paper, the mechanical performance of results from all mixtures used to cast normal concrete (NC), self-compacting concrete (SCC) and steel fibre self-compacting concrete (SFSCC) were also investigated. In total, 27 cubes, 9 cylinders, 9 prisms and 9 beams were prepared for the assessment of mechanical properties of three different mixtures. Four beams (125 mm x 250 mm x 2200 mm) were tested and cast using three different concrete mixtures, having two different spacing of stirrups as a result of 50% reduction of the stirrups amount. Three beams with different mixtures having similar stirrups spacing 125mm while the fourth beam with SFSCC mixes having 250mm stirrups spacing. The results show that the mechanical properties were positively affected with steel fibres inclusion. The addition of steel fibres showed an increment up to 40% in the shear load capacity for B-SFSCC125 compared to B-NC125 and B-SCC125. In addition, the crack pattern of B-SFSCC was found better than B-NC and B-SCC.