Experimental Results of a Wankel-type Expander Fuelled by Compressed Air and Saturated Steam

Abstract

Abstract The work presented in this paper deals with the experimental tests which were carried out on a prototype of a rotary volumetric expansion device based on the Wankel mechanism. This expansion device is addressed to small size power plants (in the range 5-50 kW) for distributed micro-generation using various sources of thermal energy, such as sun, biomass and waste heat. The prototype was built using an internal combustion Wankel engine, employing the shaft, the rotor, the bearings, while the statoric case was newly built on the design of the University of Pisa. Firstly, the tests were carried out with the compressed air produced by a compressor, then the prototype was fed with the saturated steam produced by a biomass boiler. In the first case, the exhaust back-pressure was the atmospheric one, in the second case vacuum conditions were employed thanks to a condenser. The inlet pressure was between 4 and 8 bar. The results showed the capability of the prototype to rotate regularly at 3000 rpm, and allowed the validation of numerical models presented in previous papers. Moreover, the expansion device showed the capability of developing the expected power.