Experimental research on adsorption characteristics of N2, CH4, and CO2 in coal under different temperatures and gas pressures

Abstract

AbstractThe coal deformation was induced by the gas adsorption of N2, CH4, and CO2. However, the differences between different gas adsorption performances and the deformation mechanism of coal need to be further studied. In this study, the experiments were conducted using self‐developed equipment to reveal the adsorption characteristics of different gases. The results showed that the gas adsorption capacity followed the sequence of CO2 > CH4 > N2. The gas adsorption capacity was negatively correlated with temperature. The maximum decrease in adsorption capacity (23.70%) was N2. The gas adsorption capacity was positively correlated with gas pressure. The maximum increase in gas adsorption capacity (232.79%) was N2. Correspondingly, the coal deformation of CO2 was the largest, and that of N2 was the smallest. The maximum decrease in deformation (31.09%) was CO2 during the temperature increase. The initial coal deformation rates of N2, CH4, and CO2 were 0.060, 0.091, and 0.042 mm·h−1, respectively. The maximum increase of deformation (234.65%) was CH4 with the gas pressure increase. The initial coal deformation rates of N2, CH4, and CO2 were 0.024, 0.045, and 0.016 mm·h−1, respectively. This work guided further clarifying the mechanism of different gases' adsorption capacity and coal deformation.