Experimental research on a reflective optical fiber bundle hydrogen gas sensor

Abstract

PurposeLong life and high hydrogen sensitivity are the crucial performance parameters for an optical fiber hydrogen sensing membrane, and these are the fundamental areas of study for an optical fiber hydrogen sensor. Considering that a traditional optical fiber hydrogen sensor based on pure palladium cannot meet the expectations for long life and rapid sensitivity simultaneously, the experiment in this paper designed a kind of reflective optical fiber bundle hydrogen gas sensor based on a Pd0.75–Ag0.25 alloy to achieve a hydrogen sensing system. This paper aims to discuss the issues with this system.Design/methodology/approachA reflective optical fiber bundle hydrogen sensor was made up of an optical fiber bundle and a Pd0.75–Ag0.25 alloy hydrogen membrane. A combination of optical fiber light intensity measurements and the reference calculation method were used to extract the hydrogen concentration information from within the optical fiber, and the relationship between the hydrogen concentration changes and the reflective light intensity in the optical fiber was established.FindingsThe reflective optical fiber bundle hydrogen gas sensor based on a Pd–Ag alloy membrane was shown to provide an effective way to detect hydrogen concentrations. The experimental results showed that a 20-30-nm-thick Pd0.75–Ag0.25 alloy membrane could reach high hydrogen absorption and sensitivity. Key preparation parameters which included sputtering time and substrate temperature were used to prepare the hydrogen membrane during the DC sputtering process, and the reflectivity of the Pd–Ag alloy membrane was enough to meet the requirements of long life and high hydrogen sensitivity for the optical fiber hydrogen sensor.Originality/valueThis paper seeks to establish a foundation for optimizing and testing the performance of the Pd–Ag alloy hydrogen sensing membrane for an optical fiber bundle hydrogen sensor. To this end, the optimal thickness and key preparation parameters for the Pd–Ag alloy hydrogen sensing membrane were discussed. The results of this research have proved that the reflective optical fiber hydrogen sensor based on a Pd0.75–Ag0.25 alloy is an effective approach and precisely enough for hydrogen gas monitoring in practical engineering measurements.