Abstract
Abstract In this work, a pressure-pulse-wave blockage detection experimental system (PBDES) was developed for blockage detection and investigation using propagation of pressure pulse waves in laboratory. The length of the pipeline is 220 m, it is arranged in a spiral layout to save space. A pressure pulse wave is generated by a fast-acting solenoid valve, the range of the pulse width of the incident wave is 8–50 ms, the generated signal is received by three dynamic pressure transducers. This system have several advantages: it is physically compact and thus applicable in a laboratory setting, it is simple to operate, it employs a high frequency to receive dynamic pressure signal, and it makes it possible to detect blockages experimentally. Experiments were performed to verify that the PBDES will allow practical applied application in experimental investigations of blockage detection and the propagation of pressure pulse wave, the experimental results prove itself useful for practical application.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
