Abstract
Due to large sidewall and bead thicknesses, multi-piece rims are necessary for use with large off-the-road (OTR) tyres. This paper presents the testing protocol and observed load/deflection and vertical/sidewall deflection characteristics of three Goodyear OTR tyre assemblies, namely, (1) a radial 29.5R29 (2) a bias-ply 29.5-29, and (3) a bias-ply 26.5-26. Localized tyre deformations and rim displacements were measured using optical displacement transducers and post-processing high-speed camera images using digital image analysis software. A validation analysis illustrated a maximum difference of 4.05% of vertical wheel displacements between the aforementioned methods. Quasi-static tests show the maximum values of vertical rim displacement and lateral tyre deflection are in the range of 72.2–78.9mm and 23.3–27.1mm, respectively, for a severe excitation condition. Differences ranging from 0.2% to 21.5% for maximum vertical and lateral tyre deflections were found between static load tests and engineering data provided by the tyre manufacturer. Linear relationships were observed for both vertical wheel displacement and lateral tyre deflection versus load for all tests. This study demonstrates a thorough methodology to study deflection characteristics of heavy duty OTR tyres and the collected data could be very useful in the development of numerical models of wheel and tyre assemblies for mining vehicles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
