Experimental observation and numerical modeling of formation of local plastic zones in hardened surface layers due to contact overloading

Abstract

The problem of formation of plastic zones in case-hardened metallic bodies due to contact overloading is studied both experimentally and numerically. Metallic materials exposed to surface hardening demonstrate spatial variation of the material hardness and yield strength with a decreasing profile with depth and belong to the class of so-called plastically graded materials. The presented experimental program employs micro-Vickers hardness tests to map the variation in material hardness and corresponding yield strength for both virgin and loaded case-hardened specimens made of a chromium tool steel. It is shown that, depending on the profile of the yield strength in the near-surface zones and contact parameters, a plastic deformation can originate underneath the hardened layer. The distribution of the effective plastic strain extracted from the micro-hardness increment measurements are found in good agreement with the results of finite element simulations of a plastically graded material subjected to similar loading conditions. Numerical analysis reveals significant perturbations in the stress field distribution within the hardened layer due to formation of a closed-shaped plastic zone in the gradient layers, including development of a tensile stress on the boundary between the elastic and plastic zones as well as an overall increase in the effective stress intensity. It is shown that the hardened layer behaves similar to an elastic beam on a compliant foundation. These stress field perturbations in the hardened layers with low deformation capacity can greatly affect the durability and serviceability of surface treated mechanical parts.