Abstract
Crack tip deformation fields in an aluminum single crystal are quantitatively obtained by applying a three-dimensional moiré interferometry technique. Tensile specimens made of an aluminum single crystal have an edge crack on the (2̄23) plane with their tips along the [10, 7, 2] direction. Specimens with this specific orientation undergo power law hardening with the hardening index n being 3.1. The experimental arrangement for moiré interferometry results in a displacement sensitivity of 0.47 μ/fringe. Displacement fields at the free surface near the crack tip are mapped with moiré fringe patterns. Both effective strain and maximum shear strain within a small region of less than 2 mm from the crack tip are evaluated. In partial agreement with earlier analytical and numerical solutions, the results of this experiment show that the deformation fields near a crack tip are divided into several different angular sectors, and concentrated shears are found at these sector boundaries where displacements are continuous. The experimental results also show that the effective strain and maximum shear strain remain constant (independent of angle θ) within certain angular sectors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
