Experimental laminar Rayleigh-Bénard convection in a cubical cavity at moderate Rayleigh and Prandtl numbers

Abstract

Rayleigh-Benard convection in a cubical cavity with adiabatic or conductive sidewalls is experimentally analyzed at moderate Rayleigh numbers (Ra ≤ 8 × 104) using silicone oil (Pr=130) as the convecting fluid. Under these conditions the flow is steady and laminar. Three single-roll-type structures and an unstable toroidal roll have been observed inside the cavity with nearly adiabatic sidewalls. The sequence from the conductive state consists of a toroidal roll that evolves to a diagonally oriented single roll with increasing Rayleigh number. This diagonal roll, which is stabilized by the effect of the small but finite conductivity of the walls, shifts its axis of rotation towards to two opposite walls, and back to the diagonal orientation to allow for the increase in circulation that occurs as the Rayleigh number is further increased. Conduction at the sidewalls modifies this sequence in the sense that the two initial single rolls finally evolve into a four-roll structure. Once formed, this four-roll structure remains stable when decreasing the Rayleigh number until the initial single diagonally oriented roll is again recovered. The topology and the velocity fields of all structures, characterized with visualization and particle image velocimetry, respectively, are in good agreement with numerical results reported previously for the cavity with adiabatic walls, as well as with the numerical predictions obtained in the present study for perfectly conducting lateral walls.